Those familiar with the dryer know that the double drum dryer equipment is not just a dryer, but also consists of supporting equipment such as a heat source furnace, dust collector, motor, material conveyor, etc. These supporting equipment and the dryer body form the production line of the double drum dryer equipment. Although the supporting equipment and dryer body are independent, the use of supporting equipment is necessary to complete the entire drying process of materials. The dust collector is one of the supporting components of the double drum dryer equipment. Both can operate separately, but without the use of the dust collector, the double drum dryer cannot effectively discharge the exhaust gas into the air, otherwise it will cause serious environmental pollution and the drying effect will also be affected. Users of double drum dryer equipment have encountered this situation where the dust collector cannot function properly. What should be done? As a professional manufacturer of triple drum dryers, the following suggestions are provided:

Double tube dryer equipment generally uses bag filters. Taking this as an example, we propose the following solutions:

When the staff of the three tube quartz sand dryer find that the dust bag of the equipment cannot be produced normally, they need to check it in a timely manner. They can detect whether the dust collector can operate by separating the equipment from the dust collector;

Most of the abnormal situations in the dust collector are caused by problems with the dust removal bag. The staff can carefully check whether the dust removal bag is severely worn, has a lot of dust, or has leaks. The filter bag can be cleaned and replaced in a timely manner.

If there are no issues with the above, it may be a problem with the connection and installation of the dust collector and equipment. The staff can investigate the cause from this aspect.

Generally speaking, if there are abnormal problems with the dust collector of a double drum dryer equipment, most of them are caused by the dust removal bag. Therefore, in daily production, the staff should operate the equipment correctly to prevent high temperature exhaust from the equipment. In addition, they should pay attention to the inspection, cleaning, and replacement of the dust removal bag.